Supero SUPERSERVER 6015C-M3 User Manual page 70

S S
UPER ERVER 6015C-M3/6015C-MT User's Manual
IDE Primary Master/Slave, SATA Port1, SATA Port2, SATA Port3
and SATA Port4
These settings allow the user to set the parameters of IDE Primary Master/Slave,
SATA Port1 Master/Slave, SATA Port2 Master/Slave, SATA Port3 Master, and
SATA Port4 Master slots. Hit <Enter> to activate the following sub-menu screen
for detailed options of these items. Set the correct confi gurations accordingly. The
items included in the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. The option
Auto will allow the BIOS to automatically confi gure the parameters of the
HDD installed at the connection. Enter a number between 1 to 39 to select a
predetermined HDD type. Select User to allow the user to enter the parameters
of the HDD installed. Select CDROM if a CDROM drive is installed. Select ATAPI
if a removable disk drive is installed.
7-4