Listen To Radio; Tune To A Radio Station; Program Radio Stations - Philips AJ7260D User Manual

5 Listen to radio

Note
Only FM radio reception is available on this unit.

Tune to a radio station

Tip
Use an FM antenna for optimal reception. Fully extend
and adjust the position of the antenna.
Position the antenna as far as possible from TV, VCR or
other radiation source.
[STEREO] is default setting for tuner mode.
In tuner mode, you can press and hold DBB/DSC/SET
TIME to toggle between [STEREO] and [MONO], and
the unit memorizes your setting even if you turn off the
unit or turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNE+/TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station, press
TUNE+/TUNE- repeatedly until you

Program radio stations

Radio station preset allows you to save radio
Note
The preset list can store up to 20 stations.
If the preset list is fully occupied, the screen will show
P 20.
If saving a radio station to a position that has already
been occupied, the original radio station will be
replaced.
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+/TUNE- to tune to a radio
station.
3. Press PROG/SCAN.
»
4. Press OK to save current radio station to the
selected position.
Tip
Press PRESET +/PRESET - to change the position to
save a radio station.
Program radio stations automatically
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press and hold PROG/SCAN.
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3
»
broadcasts automatically.
Select a preset radio station
1
Press / to select a preset number.
EN 11