Pre-Ride Inspection - Polaris 2013 RANGER 500 Midsize Owners Manual/Install Manual

Pre-Ride Inspection

Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item
Brake system/pedal travel
Brake fluid
Park gear
Front suspension
Rear suspension
Steering
Tires
Wheels/fasteners
Frame nuts, bolts, fasteners
Fuel and oil
Coolant level
Coolant hoses
Throttle
Indicator lights/switches
Air filter, pre-filter
Air box sediment tube
Headlamp
Brake light/tail lamp
Seat Belts
Cab Nets
Ensure proper operation
Ensure proper level
Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
Inspect, lubricate if necessary
Inspect, lubricate if necessary
Ensure free operation
Inspect condition and pressure
Inspect, ensure fastener tightness
Inspect, ensure tightness
Ensure proper levels
Ensure proper level
Inspect for leaks
Ensure proper operation
Ensure operation
Inspect, clean
Drain deposits whenever visible
Check operation, apply POLARIS dielectric grease
when lamp is replaced
Check operation, apply POLARIS dielectric grease
when lamp is replaced
Check length of belt for damage, check latches for
proper operation
Check for wear or damage, ensure proper installation
Remarks
OPERATION
Page
20
60
60
-
45
45
61
8
62
62
-
20
46
53
-
59
19
57
57
64
65
21
22
31