Audio Settings - Sony Bravia KDL-52V5500 Operating Instructions Manual

Audio Settings

Speaker
Audio Out
Headphone Settings
Optical Out
Set-up
USB Auto Start
Quick Start
TV Speaker Turns on and outputs the TV's sound from the TV speakers.
Audio System Turns off the TV speakers and outputs the TV's sound from
external audio equipment connected to the audio output
sockets/jacks on the TV.
Variable
When using an external audio system, volume output from
audio out can be controlled using the TV's remote.
Fixed The audio output of the TV is fixed. Use your audio
receiver's volume control to adjust the volume (and other
audio settings) through your audio system.
i Speaker Link Switches the TV's internal speakers on/off when you connect
headphones to the TV.
i Volume Adjusts the volume of the headphones when "i Speaker
Link" is set to "Off."
i Dual Sound
Sets the sound from the headphones for a bilingual broadcast.
Sets the audio signal that is output from the DIGITAL AUDIO OUT (OPTICAL)
jack of the TV. Set to "Auto," when connecting equipment compatible with Dolby
Digital. Set to "PCM," when connecting equipment not compatible with Dolby
Digital.
Automatically starts photo playback when the TV is turned on and a digital still
camera or other device storing photo files is connected to the USB port then turned
on.
~
• Playback does not start automatically if the TV is turned on after connecting the
digital still camera or other device to the USB port.
The TV turns on faster than usual by turning on the power using the remote.
However, power consumption in standby mode is approximately 16 watts higher
than usual. Up to 3 out of 5 time zones can be set.
35
(Continued)
GB