Table of Contents
Advertisement
1. Fit the Flue Collar using the 4-M6 set screws and washers supplied.
If the Top Flue position is required remove the fitted Flue Cover and refit on the
rear opening.
2. To fit the Baffle:
Insert the baffle, upside down, as shown, ensuring you are holding the shorter of the
two sides. Turn the baffle as you fit it, so that the edge that you are holding is placed
on the ledge at the rear of the stove. The other edge rests on the back plate between
the front and back lips as shown below.
Revision 0
Advertisement
Table of Contents
