By tilting the phone in various directions, the X:Y:Z values will
change in size and polarity depending on angle and direction
as shown in the adjacent picture.
Check by tilting the phone that the X:Y:Z values shown in the
display are in accordance with the tilting shown in the picture.
Press Back key to return to Service Test Menu.
2.2.16 Proximity switch
The previous test 'Speaker' should have been
successfully carried out before doing this test!
Make sure the phone is not in 'silent mode ' before
performing this test.
When entering into the test, it shows "Proximity switch OFF".
Once your finger cover the proximity switch area (on the right
side of the receiver), it will show "Proximity switch ON" with a
clear loud tone.
Press Back key to return to Service Test Menu.
2.2.17 Real time clock
During the actual test the text 'Real time clock test' is
displayed, then followed by a message stating whether the
test was OK or not.
Press Back key to return to Service Test Menu.
1230-2323 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Test Instruction Repair Instruction Mechanical/
+ Y
- Y
+ Z
- Z
LEFT SIDE
Front
VIEW
- Z
+ Z
- Y
Front
LEFT SIDE VIEW
+ Y
- X
+ X
Front
BOTTOM VIEW
+ X
- X
11(16)