Table of Contents
Advertisement
RTC battery
Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory/wireless module compartment cover (see
Remove the RTC battery:
1.
Release the RTC battery from the clips on the system board (1).
2.
Remove the RTC battery (2).
Reverse this procedure to install the RTC battery.
Downloaded from LpManual.com Manuals
Battery on page
36).
Spare part number
449137-001
Memory module on page
Component replacement procedures
37)
39
Advertisement
Table of Contents
