Step Function - Curtis DVD1053 Instructions For Use Manual

8.3 Playing a disc – picture CD
8.3.1 Switch on the DVD player at the mains, press the POWER button on the player, turn on the TV and
amplifier (if connected).
8.3.2 Press the OPEN / CLOSE ( ) button ('open' will appear on the TV screen) and insert a disc (label side up).
For a double-sided disc place the disc with the A/1 up. Press the button again to close the disc tray ('close'
will appear on the TV screen).
8.3.3 The unit will take a few seconds to download the initial data from the disc, the TV screen will show 'loading'
and the disc will automatically start and a slide show of the pictures on the disc will start.
8.3.4 Press the PAUSE ( ) button to pause on a particular picture and the pause indicator ( ) will be displayed.
Press the PLAY ( ) or NEXT ( ) buttons to restart the slide show.
8.3.5 Press the NEXT ( ) button to advance to the next picture or the PREV ( ) button to return to the previous
picture.
8.3.6 To rotate or flip a picture on the screen press the NAVIGATION (
picture CD. Press the PLAY ( ) or the NEXT ( ) button to restart the slide show.
8.3.7 To display and edit a series of thumbnail images of the pictures on the disc, press the STOP ( ) button.
To rotate specific images in this mode, use the NAVIGATION (
screen until 'rotate' is highlighted and press the ENTER button to enter this mode. Navigate to the image
to be rotated and press the ENTER or PLAY / PAUSE ( ) button to rotate the image by 90 degrees
clockwise. Once all pictures are in the correct orientation, highlight 'return' and press the ENTER button.
To restart the slide show, highlight 'slide show' and press the ENTER button. All pictures will now be
displayed in the correct orientation.
8.3.8 To select a specific picture, enter the picture number directly using the number buttons and the disc will
start to play from the picture selected.
8.3.9 To display the disc menu and a small insert picture, press the menu button. Use the NAVIGATION (
) buttons to move through the menu, display the small insert picture and sort the folder.
8.3.10 To activate the repeat function press the REPEAT button
•
Press the REPEAT button ONCE, to display the same picture continuously. The repeat indicator (
will appear on the TV screen.
•
Press the REPEAT button TWICE to repeat all the pictures in the folder continuously. The repeat indicator
( Folder) will appear on the TV screen.
•
Press the REPEAT button THREE TIMES to repeat all pictures on the CD continuously. The repeat
indicator ( All) will appear on the TV screen.
•
Press the REPEAT button once more to turn off the repeat function. '
temporarily.
8.3.11 To place the DVD player into standby mode, press the POWER ( ) button on the remote control. The
power indicator will remain illuminated.
8.3.12 To turn the DVD player off at any time press the POWER ( ) button on the main unit. The power indicator
will extinguish.
9. SKIP AND FAST SEARCH FUNCTIONS
9.1 To move forward to the next chapter or track on the disc, press the NEXT ( ) button. Press again to
move to each successive chapter / track / picture.
9.2 To return to the beginning of the chapter / track or move to the previous chapter / track; press the
PREV ( ) button. Repeat to move to each previous chapter / track / picture.
9.3 To search forward at speed, press the FAST FORWARD ( ) button. Press again to increase the search
speed in the sequence below.
9.4 To search backward at speed, press the FAST BACKWARD ( ) button. Press again to increase the
search speed.
9.5 When viewing DVD, press the SLOW button to select slow-motion forward at 1/2, 1/4, 1/8, 1/16, 1/32
normal speed without sound.
Note
•
A DVD will not advance or reverse during the 'Warning' section of a disc.
•
The player is muted during search mode.
•
The fast-forward / back functions are not available for picture CDs.
•
Skip and fast search functions may not be available when in pause or stop modes.
10.

STEP FUNCTION

10.1 To advance the DVD frame by frame, press the STEP button. The first press of the button freezes the
frame and each subsequent press advances the DVD by one frame. The step indicator (
displayed on the screen.
10.2 Press the PLAY ( ) button to resume playing at the point that the DVD was paused.
7
) buttons when viewing the
) buttons to move down the
Off' will appear on the TV screen
Track)
) will be