Table of Contents
Advertisement
Channels and codes
When making a code call, all parties that are on
Note:
your code and channel can hear your conversation.
Set channels and codes
To set a channel:
1
From the MOTOtalk home screen, press Edit.
2
Select the channel field, scroll to a channel and
press r to select it.
Press Back.
3
To set a code:
1
From the MOTOtalk home screen, press Edit.
2
Select the code field, scroll to a code and press r
to select it.
3
Press Back.
Make code calls
To make a code call:
Press and hold the PTT Button. You'll see Transmit
1
appear on the display. Begin speaking after you hear
the MOTOtalk tone.
2
Release the PTT Button to listen.
If you receive an error message, it may mean:
•
No one is on your channel or code.
•
You are out of range.
Receive code calls
When you receive a code call, you'll see Receive. After
hearing the MOTOtalk tone, you have 6 seconds to
reply before the call times out.
To reply to the call, press the PTT Button.
Note:
A MOTOtalk call can be ended at any time by
pressing End/Power ..
Receive all MOTOtalk calls
If you set the code to Receive All, your phone can
receive MOTOtalk transmissions from any phone that
is set to the same channel, regardless of the code
(1-15). When you receive transmissions with the code
set to Receive All, the code that the transmission was
received on will replace Receive All on the display.
You cannot initiate a code call when the code is
Note:
set to Receive All.
To set the code to Receive All:
1
From the MOTOtalk home screen, press Edit.
Select the code field, scroll to Receive All and press
2
r to select it.
3
Press Back to return to the MOTOtalk home screen.
Press the PTT Button to reply to the call.
MOTOtalk™
23
Advertisement
Table of Contents
