Table of Contents
Advertisement
2
1
1
CLEAN BATTERY (924300, 505,
506, 508)
WARNING: AVOID INJURY. Read
and understand Battery Safety Rules
in Safety section before attempting
any maintenance.
IMPORTANT: Battery is maintenance free. Do
not tamper with or attempt to open battery.
See Service and Adjustments for charging
procedures.
WARNING: AVOID INJURY. Read
and understand Maintenance and
Service and Battery Safety Rules in
Safety section before attempting
service or adjustments.
DISCHARGE CHUTE DEFLECTOR
(924117, 300, 508)
Deflector must stay in selected position while
throwing snow.
To adjust, loosen then retighten hardware to
desired deflector drag force (Figure 11).
1
1
1. Auger and Shaft
2. Discharge Chute
3. Sprocket/Pinion
Assembly
4. Axle Shaft
SERVICE AND ADJUSTMENTS
8
6
7
3
5. Shift Lever Arm
6. Pinion Chain
7. Hex Shaft
8. Shift Link
Figure 10
Terminals
Keep battery and its terminals clean.
IMPORTANT: Remove battery from unit
before cleaning.
Remove corrosion from battery terminals and
cable connections with a wire brush, then
wash with a weak baking soda solution.
After cleaning, apply a thin coat of grease or
petroleum jelly to terminals and cable ends to
retard corrosion.
Adjusting
Hardware
GB - 21
5
Grease
Discharge Chute
Deflector
Figure 11
4
Oil
OS0641
OS0741
OS0113
Hide quick links:
Advertisement
Table of Contents
