Sony RCD-W2000ES Sevice Manual page 32
Compact disc recorder
Hide thumbs
Also See for RCD-W2000ES:
- Operating instructions manual (44 pages) ,
- Limited warranty (1 page)
Table of Contents
Advertisement
RCD-W2000ES
9)
Check that the message "Power Check End" appears on display.
(Fig. 3-9)
If the measurement result is outside the specification value,
either perform Section 4. CDM65-RBD2 Electrical Adjustment,
or locate the cause of the error by performing the Laser
Deterioration Judgment.
3-2. Laser Deterioration Judgment
1)
Select the menu as follows. Control → Macro, and select
10vwdcC_S.ttl.
Press "Open". (Fig. 3-10, 3-11)
2)
Press the "RESET" button (SW101) of the jig as prompted by the display.
3)
When the message [OK] appears as shown in Fig. 3-12, press
the "OK" button.
When the laser unit KRM-220CAA (Op) is normal without
deterioration of laser, the message [OK] appears. If the laser
unit is deteriorated, the message [NG] appears. Then, replace
the laser unit KRM-220CAA (Op).
32
4 Fig. 3-9
4 Fig. 3-10
4 Fig. 3-11
4 Fig. 3-12
Advertisement
Table of Contents
