Range Selection; Converter Housing With Converter Assembly And Fluid Pump Assembly - Ford 2005 Focus Workshop Manual

2005 Focus Workshop Manual
Item Part Number
1 — Transmission assembly part number
2 — Sample build date code (DDMMYY)
3 — Sample Julian build date and build number (YDDDXXX)
4 — Service model code

Range selection

The transaxle range selector has six positions: P, R, N, D, 2, 1.
Manual selector lever position "P"
In manual selector lever position "P" no gear is selected. The parking pawl is engaged manually by the manual selector lever cable and the shift shaft.
For safety reasons, always apply the parking brake whenever the vehicle is parked.
Manual selector lever position "R"
In manual selector lever position "R" reverse gear is selected. REVERSE allows the vehicle to be operated in a rearward direction, at a reduced gear ratio.
Manual selector lever position "N"
In manual selector lever position "N" no gear is selected. The driveline is not locked, so the wheels are free to rotate.
The vehicle may be started in NEUTRAL.
Manual selector lever position "D"
In manual selector lever position "D" and when the O/D switch is not pressed, the transmission control allows all the gears to be selected. When the O/D switch is pressed, shifting into
fourth gear is prevented or the transmission shifts down to third gear.
Manual selector lever position "1"
In manual selector lever position "1" only first gear is selected. In addition to the first gear one-way clutch, the transmission control closes the reverse gear brake to produce engine braking
effect in overrun.
If the manual selector lever is moved to position "1" at an excessive vehicle speed for first gear, the transmission control only allows the downshift to take place when the corresponding
vehicle speed has been reached.
Manual selector lever position "2"
In manual selector lever position "2" only second gear is selected. The transmission control does not allow shifting into first gear.
If the manual selector lever is moved to position "2" at an excessive vehicle speed for second gear, the transmission control only allows the downshift to take place when the corresponding
vehicle speed has been reached.

Converter Housing with Converter Assembly and Fluid Pump Assembly

http://www.fordtechservice.dealerconnection.com/pubs/content/~WS5Y/~MUS~LEN/19/S5...
Description
Page 2 of 8
6/1/2010