Installing The Monitor Driver (Automatic) - Samsung SyncMaster 225BW User Manual

A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove two screws and then remove the stand from the LCD monitor.
4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it
with four screws that came with the arm-type base, wall mount hanger or other base.
To mount the monitor on a wall, you should purchase the wall mounting kit that allows
you to mount the monitor at least 10 cm away from the wall surface.
Contact the nearest Samsung Service Center for more information.
Samsung Electronics will not be responsible for damages caused by using a base other
than those specified.
Please use Wall Mount according to the International standards.

Installing the Monitor Driver (Automatic)

When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
below.
Internet web site :
1. Insert the CD into the CD-ROM drive.
2. Click "Windows."
3. Choose your monitor model in the model list, then click the "OK" button.
Downloaded from ManualMonitor.com Manuals
http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor
http://www.sec.co.kr/monitor
http://www.samsungmonitor.com.cn/
(U.S.A)
(Korea)
(China)