Standard Installation - RCA RLC4036A Owner's Manual

INSTALLATION

STANDARD INSTALLATION

The TV can be installed in various ways such as on a wall, or on a desktop etc.
10 inches
The TV is designed to be mounted horizontally.
Ensure that you connect the earth ground wire to prevent possible electric shock.
If grounding methods are not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to ground the unit by connecting it to telephone wires, lightening rods or gas pipes.
a. Desktop Pedestal Installation
This is the default installation way of the TV.
b. Wall Mount: Horizontal installation
(1) Secure the wall brackets with the bolts (not provided as parts of the product, must
purchase separately) on the wall. Match the height of the bracket that is mounted on
the wall. The wall bracket is of nomal dimension. Please see the position of the wall
brackets bolts as follow picture .The actual dimension of the wall brackts bolt should
according to the products.
The wall brackets bolt position
10 inches
10 inches
10 inches
10 inches
Power
Supply
Short-Circuit
Breaker
400mm
5
14
INSTALLATION
STANDARD INSTALLATION
b. Wall Mount: Horizontal installation
(2) Remove the table stand of the TV when install the TV on a wall as follow:
(3)For proper ventilation, allow a clearance of 10" on each side from the wall.
10 inches
NOTES OF WALL INSTALLATION
(1) Keep the TV stand for may be future use.
(2) Don't set the TV set on shelves, carpets, beds, or closets.
(3) Don't cover the TV with curtain or paper.
(4) Leave ventilation space to avoid the following:
No good for ventilation
10 inches
10 inches
10 inches
No good for ventilation
15