Tour Of The Remote Control; Remote Control; Connections; Connecting To A Tv - Samsung BD-J5500 User Manual

Remote Control

tour of the Remote Control

Turn the player on and off.
Press to open and close the disc tray.
Press numeric buttons to operate options.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to play a disc.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Press to use Tools menu.
Use to select menu items and change menu
values.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use Bonusview function.
Allows you to repeat A-B disc.
Installing batteries
NotES
✎
If the remote does not operate properly:
`
• Check the polarity (+/–) of the batteries.
8
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Use to enter the popup menu/title menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to move to the home menu.
AUDIO HOME SUBTITLE
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to display the playback information.
Press to exit the menu.
Press to see the full screen on a TV.
BONUS REPEAT REPEAT FULL
During Blu-ray or DVD disc playback, the
VIEW A-B SCREEN
Full screen button does not operate.
Allows you to repeat a title, chapter, track or
disc.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
CAutIoN
!
Dispose of batteries according to local environmental
`
regulations. Do not put them in the household trash
Do not dispose of batteries in a fire.
`
Do not short circuit, disassemble or overheat the batteries.
`
Danger of explosion if battery is incorrectly replaced.
`
Replace only with the same or equivalent type.

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
- Do not connect the power cord to the wall outlet until you have made all the other
connections.
- When you change the connections, turn off all devices before you start.
NotES
✎
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
`
Out on the player to an audio system to hear audio.
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
`
your TV.
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
`
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
`
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
`
HDMI outputs only a pure digital signal to the TV.
`
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
Audio
Video