System Settings; Language Settings; Security Settings; General Settings - Samsung BD-J5500 User Manual

the dLNA function
DLNA lets you play music, video, and photo
files located in your PC on the player.
To use DLNA with your player, you must
connect the player to your network.
(See page 13-14).
To use DLNA with your PC, you must install
DLNA software on your PC.

System Settings

Setup
By using the Setup function, you can set the
language, Network Settings, etc.
For more information about the Setup
function, refer to the Initial Settings section of
this user manual (page 10).

Quick Start

You can turn on the power quickly by
decreasing the boot time.
NotES
✎
On, Standby power
If this function is set to
`
consumption will be increased.
Anynet+ (HdMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player
to an Anynet+ Samsung TV with an HDMI
cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the pLAy
( ) button on the TV's remote control.
For more information, please see the TV user
manual.
14
NotES
✎
This function is not available if the HDMI cable
`
does not support CEC.
If your Samsung TV has an Anynet+ logo, then
`
it supports the Anynet+ function.
Depending on your TV, certain HDMI output
`
resolutions may not work.
Please refer to the user manual of your TV.
If you have Anynet+ turned on, when you
`
turn off the product, disconnect, and then
reconnect the power cable, the product turns
on automatically to re-establish the Anynet+
connection. After about 15 seconds, it turns off
again automatically.
Some Samsung TVs, when connected to this
`
product using the Anynet+ function will, when
you turn them on, display a warning popup
message saying no connection has been
found. Never-the-less, the Anynet+ connection
is properly established and available to use.

Bd data Management

Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device's information
including the storage size, delete the BD data,
or change the Flash memory device.
NotES
✎
In the external memory mode, disc playback
`
may be stopped if you disconnect the USB
device in the middle of playback.
Your player supports the FAT16, FAT32, and
`
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
The Resume Play function may not work after
`
you format the storage device.
The total memory available to BD Data
`
Management may differ, depending on the
conditions.
divx® Video on demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.

Language Settings

You can select the language you prefer for
the On-Screen menu, disc menu, audio, and
subtitles.
NotES
✎
The selected language will only appear if it is
`
supported on the disc.

Security Settings

When you access this function for the first
time, the PIN screen appears. Enter the
default PIN - 0000 - using the number
buttons. To change the PIN, use the Change
PIN function. Each time you access the
Security Settings hereafter, you must enter
that four digit PIN. If you don't change the
PIN, continue using the default PIN.

Bd parental Rating

Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.

dVd parental Rating

This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set.
For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
When the DVD Parental Rating function is on,
you must enter the 4 digit PIN to play discs
with restricted rating levels.
Change pIN
Change the 4-digit password used to access
security functions.
To change the PIN, follow these steps:
1. Change pIN, and then press the
Select
v button. The Enter old PIN screen
appears.
2.
Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000.
The Enter new PIN screen appears.
3.
Enter the new PIN in the Enter new PIN
fields.
4.
Re-enter the new PIN in the Confirm
new PIN fields. The "PIN is changed
successfully." message appears.
5.
Press the v button.
If you forget your password
1.
Remove any discs.
2.
Press and hold the ^ button on the front
panel for 5 seconds or more.
All settings will revert to the factory settings.
NotES
✎
When the factory default settings are restored,
`
all the user stored BD data will be deleted.

General Settings

time Zone

Lets you specify the time zone that is
applicable to your area.