Connections For A High-Defi Nition Tv (Hdtv) - Cisco PDS3241 Installation Manual

Connections for a High-Defi nition TV (HDTV)

To use the receiver with an HDTV, you must make one of the following connections to
view the HD content. Refer to the owner's manual for your TV and the cabling diagrams
in this manual for more detailed connection information.
Although all connections provide you with quality service, we list the connections in our
recommended order.
Notes:
• The labeling on your receiver or HDTV may vary slightly from the illustrations shown below.
• Some cables shown in the connection diagrams may not be included with this receiver.
Use One of These Required
Connections to an HDTV
Some HDTVs have a High-Defi nition
Multimedia Interface (HDMI) connector. The
HDMI connector provides both a digital video
and audio connection. See the connection
diagram on page 14 for an example.
Note: The HDMI port on the TV must
support high-bandwidth digital content
protection (HDCP).
The HDMI connector can provide the
connection to an HDTV with a DVI input. If
your HDTV has a Digital Visual Interface
(DVI) connector, you need an HDMI-to-DVI
adapter, and a separate audio connection
(either L/R or optical audio).
Note: The DVI port on the TV must support
high-bandwidth digital content protection
(HDCP).
See the connection diagram on page 15
for an example.
The YPbPr (red, blue, and green)
connectors provide high-defi nition
component video signals to an HDTV, and
a separate audio connection (either L/R or
optical audio).
See the connection diagram on page 16 for
an example.
Some HDTVs have only RGB or RGB-
HV connectors. If you have one of these
HDTVs, you need a Component-to-RGB
adapter, and you need a separate audio
connection.
Receiver
Connections
Adapter Needed
L R
AUDIO
OUT
OPTICAL
Pb Y
Pr
L R
AUDIO
OUT
OPTICAL
Pb Y
Pr
Adapter Needed
L R
AUDIO
OUT
HDTV
Connections
DVI
L R
OPTICAL
INPUT
Y
Pb
Pr
L R
OPTICAL
INPUT
R
G H
B V
11