Connections; Installing The Wall Mount; Installation Precautions - Samsung HW-H551 User Manual

connections

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall.

Installation Precautions

• Install on a vertical wall only.
• For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the
weight of the set.
• Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or
install the unit on a different wall that can support the unit's weight.
• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board,
iron board, wood, etc.). If possible, fix the support screws into wall studs.
• Purchase wall mounting screws according to the type and thickness of the wall you will mount the
Soundbar on.
• Diameter : M5
• Length: 1 3/8 in (35 mm) or longer recommended.
• Connect cables from the unit to external devices before you install it
on the wall.
• Make sure the unit is turned off and unplugged before you install it.
Otherwise, it may cause an electric shock.
1. Place the installation guide against the wall surface.
• The installation guide must be placed parallel to the wall.
• Installation should be done at least 2 inches (5 cm) below
the TV.
2. Mark the location where the screws will go through on the
wall using a pen, and then remove the installation guide.
3. Fasten the wall mount and screw to the marked location.
• The left and right mounts are different shapes.
4. Secure the two holder screws to the screw holes on the
back of the Soundbar's main body, one on the left and
one on the right.
5. Insert the USB cable into the unit before installing it on the
wall.
6. Set the holder screws on the back of the Soundbar into
the grooves of the wall mount.
For safe installation, make sure to push the holder screws
all the way to the bottom of the grooves.
10
2 inches(5 cm) or more
Using the Soundbar with Wall Mount
[Wall Mounting the Soundbar]