Trip Computer - Fiat Bravo Owner's Handbook Manual

Cornerning light
(activation/deactivation of
"Cornering lights")
(for versions/markets,
where provided)
This function makes it possible to acti-
vate/deactivate the "Cornering lights" (see
the description in the "Exterior lights"
paragraph).
Proceed as follows to activate/deactivate
the lights (ON/OFF):
– press the MODE button briefly, the dis-
play will show On or Off flashing depend-
ing on the previous setting;
▲ ▼
– press the or button to make the
selection;
– press the MODE button briefly to re-
turn to the menu screen or press the but-
ton for longer to return to the standard
screen without memorizing.
Exit Menu
This is the last function that closes the cir-
cular setting cycle listed in the initial menu
screen.
Briefly press button MODE to go back to
the standard screen without storing set-
tings.
▼
Press button to return to the first
menu option (Speed Beep).
36

TRIP COMPUTER

General features
The "Trip computer" displays information
(with ignition key at MAR), relating to the
operating status of the car. This function
comprises two separate and independent
trips: "Trip A" and "Trip B" concerning
the "complete mission" of the car (jour-
ney).
Both functions are resettable (reset - start
of new mission).
"Trip A" shall be used to display the fig-
ures relating to:
– Range
– Trip distance
– Average consumption
– Instant consumption
– Average speed
– Travel time (driving time).
"Trip B" displays the figures relating to:
– Trip distance B
– Average consumption B
– Average speed B
– Travel time B (driving time).
Note "Trip B" function can be excluded
(see paragraph "Trip B On/Off"). "Range"
and "Instant consumption" cannot be re-
set.
Values displayed
Range
This indicates the approximate distance
which can be travelled with the present
amount of fuel in the tank. The display will
show the reading "- - - -" when the fol-
lowing events take place:
– value lower than 50 km (or 30 mi)
– car left parked with engine running for
long.