Fujitsu B19-6 LED Operating Manual page 21

B19-6 LED
1 = Holes for fixing swivel arm or wall bracket
2 = Security slot for the "Kensington Lock"
3 = Power connector
► Select the appropriate data cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket,
DVI-D socket or the DisplayPort socket of the monitor and secure the plug
connection by tightening the retaining screws.
The monitor automatically detects the input when only one signal source is connected.
► Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
only for B22W-6 LED
► Plug the supplied USB cable into the USB IN socket and the other end of
the cable into a USB socket of the computer.
Connect the USB keyboard and USB mouse directly to the PC, as the USB connector
socket of the monitor is switched off in energy-saving mode.
Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
2
1
1
3 4
4 = AUDIO-IN socket
5 = DVI-D connector (DIGITAL)
6 = D-SUB socket (ANALOG)
Getting started
5 6
17