Connecting HDMI Input
You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the
HDMI IN connector of your projector.
NOTE: The HDMI 1 IN/HDMI 2 IN connector supports Plug & Play (DDC2B).
Input connector
HDMI 1 IN
HDMI 2 IN
TIP: For users of audio video equipment with an HDMI connector:
Select "Enhanced" rather than "Normal" if HDMI output is switchable between "Enhanced" and "Normal".
This will provide improved image contrast and more detailed dark areas.
For more information on settings, refer to the instruction manual of the audio video equipment to be connected.
•
When connecting the HDMI 1 IN (or HDMI 2 IN) connector of the projector to the DVD player, the projector's video
level can be made settings in accordance with the DVD player's video level. In the menu select [HDMI SETTINGS]
→ [HDMI1] (or [HDMI2]) → [VIDEO LEVEL] and make necessary settings.
If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [HDMI1] (or [HDMI2]).
•
SOURCE button on the projector
cabinet
HDMI1
HDMI2
6. Installation and Connections
HDMI cable (not supplied)
Use High Speed HDMI
Audio cable (not supplied)
Button on the remote control
150
Cable.
®
HDMI
HDMI