Indoor Comfort Display
The indoor comfort display is based off of the humidity read by the weather station. Air that is too
dry or too wet can cause discomfort. The weather station will automatically display the indoor
comfort of your home with a simple statement:
26%-39%
1%-25%
76%-83%
83%-99%
40%-75%
Heat Index/Dew Point/Mold Risk Indicator
The HEAT/DEW button toggles between Heat Index, Dew Point, and Mold Risk.
Each feature will display for 10 seconds then return to defualt disply is the button
is not pressed again.
Heat Index
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot
it feels to a human being. As humidity increases, the body is unable to cool effectively; therefore,
the temperature will feel warmer.
View Heat Index: From a normal display, press the HEAT/DEW button once and Heat Index will
show in place of the remote temperature.
Note: Heat index will be the same number as the temperature until the remote temperature is
above 80 °F (26.7°C).
Dew Point Temperature
Dew Point Temperature is the saturation point of the air, or the temperature to which the air has
to cool in order to create condensation. The higher the dew points, the higher the moisture
content of the air at a given temperature.
View Dew Point Temperature: From a normal display, press the HEAT/DEW button twice and
Dew Point will show place of the remote temperature.
Note: Dew Point is lower than the actual temperature.
Mold Risk Indicator
Mold Risk is based on temperature and humidity. Monitor the mold risk for two separate areas
using the indoor weather station and multi-use remote sensor. Place the remote sensor outdoors
to monitor backyard weather conditions, or use it indoors to monitor high mold risk areas like in a
crawl space or a basement.
View Mold Risk Indoor and Remote locations: From a normal display, press the HEAT/DEW button
three times and the Mold Risk will show next to the remote and indoor humidity.
Model: C83332/C83349
www.lacrossetechnology.com/support
Page | 9