Components
➊
Universal Charging Port — Use to charge one additional wireless device.
➋
Jetpack Charging Port — Use to connect the wall charger or to tether a device.
➌
Navigation Buttons — Scrolls left/up or right/down through available menu options.
➍
Select Button — Use to select a menu option.
➎
Home Screen — Displays the status bar, data usage meter, and menu options.
➏
LED Indicator — When the display is off and the Jetpack is turned on, the LED indicator
blinks.
➐
Real-time Data Usage Meter — Displays current data usage in GB and cycle end date.
➑
Status Bar — Provides connection and battery status, network signal strength, roaming
status, number of unread messages, and the number of users connected with Wi-Fi.
➒
Power Button — Powers the Jetpack on and off, and turns display back on when device is in
power-saving mode.
➓
Test port — Use for testing and diagnostics.
➊
SIM Card Slot — The SIM card is pre-installed here.
➋
Battery Removal Divot — Insert a fingernail here and lift to remove the battery.
➌
Battery Compartment — The battery contacts connect here.
➍
Master Reset Button — Insert a paperclip in the small hole to reset the Jetpack to factory
settings.(See
How do I reset the Jetpack back to factory settings?
➓
➊ ➋ ➌
➊
➋
➌
➒
➑
➐
➏
➎
➍
➌
➍
4
on page 109.)