Temp Setting Button; Auto Key; Timer Control; Sleep Control - Trane R-410A Split System Technical & Service Manual

TEMP . setting button
Each time TEMP + or TEMP - button is pressed, the set temperature will be increased or decreased
by 1ºC.
Adjusting range is 16~30ºC . In AUTO mode, this button does not function.

AUTO key

When the unit is stop, press AUTO key, the unit will run under AUTO mode and the swing motor
starts.
When the unit is running, press AUTO key, the unit will be stopped.
AUTO/STOP
Handling switch

Timer control

The unit is turned on or off according to the timer set by the remote controller.

Sleep control

When the air conditioner is in COOL or DRY mode, after Sleep mode has been set properly, the
preset Tset will be increased by 1ºC after the sleep program has run for 1 hour, and Tset will be
increased by another 1ºC after 2 hours. Tset has been increased by 2ºC total in two hours. Then the
unit will run at this set temperature and at the set speed.
T +1
set
T
set
1 h 2 h
When the air conditioner is in HEAT mode, after Sleep mode has been set properly, the preset Tset
will be decreased by 1ºC after the sleep program has run for 1 hour, and Tset will be decreased by
another 1ºC after 2 hours. Tset has been increased by 2ºC totally in two hours. Then the unit will
run at this set temperature and at the set speed.
1 h 2 h
T
set
T -1
set
In AUTO or FAN mode, the setting temp. will not change.
Set temp.T
T +2
set
Above 2h
Above 2h
T -2
Set temp.T
set
set
set
37