Alarm Setting - JBL On TIME Micro User Manual

Am/fm radio and speaker dock for ipod/iphone
Hide thumbs Also See for On TIME Micro:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
jbl On TIME MIcrO UsEr GUIdE
8
cOnTrOls (cOnT.)

Alarm Setting

1.
Press Menu/Up Level at any screen to display Top Menu (may require repeated presses,
depending on which menu state the unit was previously in).
2.
Use Up/Down arrows to highlight Alarm. Press Enter to confirm; or press Alarm to go directly to the Alarm menu.
3.
Use Up/Down arrows to select an Alarm slot to edit. Press Enter to confirm. Hour field becomes highlighted.
4.
Use Up/Down arrows to set Hour. Press Enter to confirm. Minute field becomes highlighted.
5.
Use Up/Down arrows to set Minutes. Press Enter to confirm. AM/PM field becomes highlighted.
6.
Use Up/Down arrows to set AM/PM. Press Enter to confirm.
7.
Use Up/Down arrows to set Day of Week, Weekdays, Weekends, Everyday or One-Time. Press Enter to confirm.
8.
Use Up/Down arrows to set Alarm source. Press Enter to confirm. Alarm is set!
Note: During alarm-setting, if there is no user input for 2 seconds, display will return to the Now Playing screen. Press any one of the
Enter, Up/Down arrows, or Menu/Up Level to return to setting selection.
Use this same procedure to modify a previously set Alarm.
To Enable/Disable a Set Alarm
1.
Press Menu/Up Level at any screen to display the Top Menu (may require repeated presses,
depending on which menu state the unit was previously in).
2.
Use Up/Down arrows to highlight Alarm. Press Enter to confirm;
or press Alarm to go directly to the Alarm menu.
3.
Use Up/Down arrows to highlight Alarm. Press Alarm to enable/disable the alarm.
An icon will be displayed on the left when the alarm is enabled, and the alarm will sound at the set time.
Waking to the iPod/iPhone
1.
Use the steps under Alarm Setting and choose "iPod" as the source.
2.
On your iPod/iPhone, choose the song you would like to awaken to and press Play.
3.
Put your iPod/iPhone to sleep by holding down the Play/Pause button (older iPod models may vary).
4.
The JBL On Time Micro system can be put to sleep by pressing the Power button.
Note: If you choose the last song on your iPod/iPhone, please place the iPod/iPhone in repeat mode, which will ensure that the iPod/iPhone will continue playing past
the last song.
Power
Alarm
Source
Preset
Select Up
Menu/Up Level
Enter
Select Down

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents