Preventative Maintenance Schedule; Oil Change Record - Kärcher SSE-503007A Operator's Manual

This pressure washer was produced with the best available materials and quality craftsmanship. However, you
as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative
maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer for
maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform
maintenance more often under severe conditions.
MAINTENANCE SCHEDULE
Pump Oil
Check and Tighten Belts
Remove Burner Soot
Burner Adjustment/Cleaning
Replace Burner Nozzle
Descale Coil
Replace High Pressure Nozzle
Replace Quick Couplers
Clean Water Screen/Filter
Replace HP Hose
Grease Motor
Check Fuel Filter
Check Safety Controls

OIL CHANGE RECORD

Check pump oil level before first use of your new pressure washer. Change pump oil after first 50 hours and
every 3 months or 500 hours thereafter. Use SAE 30 weight oil, non-detergent.
PREVENTATIVE MAINTENANCE
Inspect Oil level daily
Change After first 50 hours, then every 500 hours or annually
Every 3 months
Annually
Annually
Annually
Annually (More often if required)
Every 6 months
Annually
Weekly
Annually (If there are any signs of wear)
Every 10,000 hours
Every 3 months
Daily
Date Oil Changed
Month/Day/Year
620-622 • 9.800-187.0 • Rev. 9/10
Estimated Operating
Hours Since
Last Oil Change
13