I 2 Of 5 Check Character Calculation - PSC Magellan 2300HS Reference Manual

Programming

I 2 of 5 Check Character Calculation

NOTE
5-222
Enables/disables calculation and verification of an optional Interleaved 2
of 5 check character.
If check character calculation is disabled, the risk is increased that a mis-
read can occur. When disabled, any check characters in a bar code are
treated as data characters.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
I 2 of 5 CHECK CHARACTER CALCULATION = DISABLE
I 2 of 5 CHECK CHARACTER CALCULATION = ENABLE
®
Magellan 2200VS and 2300HS