Manager Configuration Settings; Entering And Using The Manager Configuration Settings Feature - Life Fitness Ab Curl Bench None Operation Manual

5
M
ANAGER
5.1 E
NTERING AND
Fitness club managers and other authorized personnel can use the Manager Configurations feature to change default settings or to
enable or disable certain workouts or displays on the Life Fitness exercise equipment.
Setting
MAX WORKOUT
DURATION
ENGLISH/METRIC
UNITS
WATTS DISPLAY
ENABLE/
DISABLE
METS DISPLAY
ENABLE/
DISABLE
CAL/HR DISPLAY
ENABLE/
DISABLE
SLEEP TIMER ON
PAUSE TIME
MARATHON MODE
DEFAULT LANGUAGE SETUP ENGLISH
USER LANGUAGE SELECT
TELEMETRY
QUICK START KEYS
STATISTICS
MAX INCLINE
STRIDE SENSOR
ACCELERATION RATE
DECELERATION RATE
BELT NOTIFICATION
MIN SPEED
MAX SPEED
22
C
ONFIGURATIONS
U M
SING THE ANAGER
M
ANAGER
Default Value Description
60 minutes This is the maximum possible duration for a workout. The value can range from10 to 99.
ENGLISH This option determines the units used for entering weight and measuring distance.
DISABLED If this option is enabled, the MESSAGE CENTER displays the of Watts equivalent
pedaling rate.
DISABLED If this option is enabled, the MESSAGE CENTER displays the METs equivalent of the
pedaling rate.
DISABLED If this option is enabled, the MESSAGE CENTER displays the number of calories
burned per hour during the workout.
60 SECONDS Enables the LED screen backlight to be turned off due to inactivity (non-treadmill products).
60 SECONDS The amount of time the unit can be inactive before it reverts back to the workout summary.
The range is between 1 and 99 minutes.
DISABLED Enable/Disable Marathon Mode.
Select a language as the default upon an exit from diagnostics.
DISABLED This option, if enabled, gives users the ability to select
a language for use during a workout. See the topic
entitled User Language Select, in this section.
ENABLED This feature makes it possible to use the Polar-compatible Heart Rate Zone Training
exercise chest strap for monitoring heart rate.
ENABLED Enable/Disable a method to enter a Quick Start workout associated with (treadmills)
walk, jog, and run keys.
N/A Press any UP arrow key to display information including cumulative hours the equipment
was used, the number of times specific workouts were started, and cumulative distance.
15% The maximum incline available to the users for the purpose of workout (treadmills)
programming and execution.
ENABLED This feature automatically pauses the workout if the user steps off the (treadmills) belt.
3 Set the acceleration rate.(treadmills)
3 Set the deceleration rate.(treadmills)
DISABLED If enabled, this options will alert a fitness club manager if a belt notification
(treadmills) exists.
0.5 MPH The minimum speed available to the users for the purpose of workout (treadmills)
programming and execution.
10 MPH The maximum speed available to the users for the purpose of workout (treadmills)
programming and execution.
C
ONFIGURATION
C S
ONFIGURATION ETTINGS
S
ETTINGS