Advertisement
Quick Links
Advertisement
Related Manuals for Life Fitness Classic Series Cross-Trainer CLSXH
Summary of Contents for Life Fitness Classic Series Cross-Trainer CLSXH
- Page 1 Classic Series Cross-Trainer Model CLSXH A s s e m b l y I n s t r u c t i o n s...
- Page 2 Congratulations... and welcome to the world of The following Parts List and the step-by-step assembly procedures have been assembled to make the set-up of the Cross-Trainer as quick and easy as possible. Please take special note of the following important points prior to choosing a location and beginning assembly of the Cross-Trainer.
- Page 3 MPORTANT DO NOT LOCATE THE ROSS HUMIDITY DO NOT OPERATE YOUR ROSS IMMERSED IN WATER F THIS OCCURS THE NUMBER IN THE PERATION DO NOT LOCATE THE ROSS DO NOT LOCATE ADDITIONAL CENTER TO CENTER TO AVOID INTERFERENCE KEEP THE AREA AROUND YOUR WALLS AND FURNITURE NSURE THAT THERE IS AT LEAST A OF THE...
-
Page 4: Parts Description
OOLS EQUIRED FOR Magnetic #2 Bit Phillips Screwdriver, T-45 Hex Key Wrench, 16mm Open End Wrench Torx Socket Head Screw M8 – 1.25 x 19 0017-00101-1791 Phillips Pan Head Screw M4.2 – 0.70 x 10 0017-00101-1846 Front Rocker Cover OK62-01009-0000 Console Support Assembly OK62-00123-0000 Front Pivot Arm Cover... - Page 5 DO NOT DISCARD THE SHIP KIT LOCATED ON TOP OF THE PEDAL LEVERS. ALL NECESSARY COMPONENTS NEEDED TO COMPLETE THE INSTALLATION ARE LOCATED IN THE SHIP KIT. NE JETEZ PAS LE KIT PLACÉ SUR LE DESSUS DES LEVIERS DE PÉDALE. IL CONTIENT TOUS LES ÉLÉMENTS Locate the LEFT HANDLEBAR (11).
- Page 6 Locate the DISPLAY CONSOLE (4). Position the CONSOLE near the top of the CONSOLE BRACKET. Attach all CONNECTORS (F & G) leading from the CONSOLE BRACKET to their corresponding CONNECTORS in the back of the DISPLAY CONSOLE. Feed any excess WIRE HARNESS into the CONSOLE BRACKET and place the DISPLAY CONSOLE onto the CONSOLE BRACKET aligning the mounting holes.
-
Page 7: Pre-Operation Checklist
PRE-OPERATION CHECKLIST Ensure that all fasteners are tight. Make sure the CROSS-TRAINER is properly leveled and stable. (Refer to the Operation Manual) Ensure that the Leveler Jam Nuts are tight. (Refer to the Operation Manual) Read the entire Operation manual before using the Cross-Trainer. LISTE DES VÉRIFICATIONS À... -
Page 8: Model Number & Serial Number
Prior to your call, please be sure you have located and noted the The Model & Serial number information of your Life Fitness Cross-Trainer is listed on a label ©2008 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness, Lifepulse, FlexDeck and Smart Stop are trademarks of Brunswick Corporation.