Table of Contents
Advertisement
10
Sources
10.1
Switch to a device
From the list of Sources, you can switch to a
connected device and watch its programme.
To switch to a connected device...
1 - Press SOURCES to open the Sources menu.
2 - Select one of the item in the source list. The TV
will show the programme or content of the device.
3 - Press BACK, to watch TV.
To close the Sources menu without switching to a
device, press SOURCES again.
10.2
Device Detection
When you connect a new device to the TV, the device
is detected and you can assign a device type as an
icon for the new device. If you connect a device with
HDMI CEC, the device gets its icon automatically.
If you want to change the icon assigned to a
connected device, press and select a device type
that fits the connected device.
If the name does not fit the device or you want to give
the device a name of your own, press . Use the
remote control keypad to enter a new name.
An appropriate device type helps you in using the
device. The device type determines picture and
sound styles, resolution values, specific settings or the
position within the Sources menu.
When you connect a new device to the TV, the icon
of the device jumps to the front of the Sources menu.
Original name and icon
To restore the device icon to its original name and
type icon, press and select Reset.
Scan connections
To rescan all TV connections and update the Sources
menu, press .
10.3
One Touch Play
With the TV in Standby, you can switch on a disc
player with your TV remote control.
Play
To switch on both disc player and TV from Standby
and start playing the disc immediately,
press (play) on the TV remote control.
The device must be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
39
Advertisement
Table of Contents
