Ford KUGA Owner's Manual page 33

1. Slide the release slider in the direction
of the arrow.
2. Remove the key blade.
E105064
3. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
4. Carefully prise out the battery with the
screwdriver.
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Install a new battery (3V CR 2032) with
the + facing downwards.
6. Assemble the two halves of the remote
control.
7. Install the key blade.
Kuga (CBS) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 31-05-2015, CG3585en enGBR, Edition date: 08/2014, First Printing
Keys and Remote Controls
3
Remote Control without a Folding
Key Blade
1
E87964
1. Press and hold the buttons on the
edges to release the cover. Carefully
remove the cover.
2. Remove the key blade.
E105362
3. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
31
2
1
3