Watching Two Programs - Sony KP-43T90 Operating Instructions Manual

Watching Two Programs at One Time - PIP
The Picture-in-Picture (PIP) feature allows
you to view two channels simultaneously,
one in the full size "main" picture and one in
a smaller "window" picture.
You can move the window picture to any
location on the screen. (Free Layout Picture-
in Picture)
The symbol "e" or "4' The symbol "J*'
indicates which picture's indicates which
TV channel or input picture's sound is being
source can be changed. received.
TV channel or input-
Main
source mode for the
pktLIr
main picture* (ye!!ow-
green-coiored)
* It will dim in about 3 seconds:
Notes:
l
The aux antenna input on the rear panel
will not be able to be selected in the PIP
window.
l
If you use a cable box connection, you
will not be able to watch two different
programs at the same time.
,,
PIP
0
POSITION
0
or
ACTIVE
@
Press to display a window picture.
Each time you press this button, the picture size will change
(l/9 +1/16 +no display).
To close the window picture, press PIP repeatedly until it disappears.
Press POSITION repeatedly to change the location of the window picture
(counterclockwise) around the main picture.
You can also change the location by pressing the 4, +, + or + button.
The window picture moves in the direction of the arrow indicated on the
pressed button.
Press to select either the main or window picture in order to change the
TV channel or video source using the white labeled buttons below. The
symbol "+" (or "4) will appear to indicate which picture's channel or input
mode can be changed.
Press repeatedly to scroll through the available video inputs for the
picture on which the symbol 3" (or "4) is displayed. (see "TV/VIDEO" on
page
21)
lfyou press RESET in
PIP
mode, the window picture will move to the bottom right (factory-preset
locationl
"