❸ Turning On The Projector - NEC UM352W User Manual

❸ Turning on the Projector
• Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will be-
come ready to use.
TIP:
• When the message "Projector is locked! Enter your password."
is displayed, it means that the [SECURITY] feature is turned on.
(→ page 35)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Standby
Steady red light
(→ page 122)
14
Blinking Power On
Blinking blue light Steady blue light