Sony HDR-XR100 Operating Instructions Manual page 178

'Self-diagnosis displaylWarning
'ndicators _ . _ , ' :
~
l'
'I"< " " ' , _
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility.
[SMTH SLW REC],
[DIGITAL ZOOM],
[FADER), [SELF-TIMER]
[SMTH SLW REC]
[SMTH SLW REC],
[DIGITAL ZOOM],
[FADER], [SELF-TIMER]
[FADER], [TELE MACRO]
[SMTH SLW REC],
[DIGITAL ZOOM),
[FADER], [SELF-TIMER]
[SMTH SLW REC],
[DIGITAL ZOOM],
[SPOT MTRlFCS], [SPOT
METER], [SPOT FOCUS],
[EXPOSURE], [FOCUS],
[TWILIGHT], [TWILIGHT
PORT.] (HDR-XR200/
XR200V), [CANDLE],
[SUNRISE&SUNSET] ,
[FIREWORKS],
[LANDSCAPE] ,
[SPOTLIGHT], [BEACH],
[SNOW], [WHITE BAL.],
Because of following settings
[SCENE
SELECTION]
[SMILE
PRIORITY]
[FRAME
SETTING]
[SMILE
SENSITIVITY]
[DETECTION
SET]
[FACE
DETECTION]
Cannot use
The current location on the map of the
camcorder is different from the actual
current location (HDR-XR200V).
• The margin of error of the radio signal from
GPS satellites is large. The margin of error can
be as wide as several-hundred meters at the
maximum.
The following list shows examples of
unworkable combinations of functions and
menu items.
Jrubbing1-;Om1ec~in9:to otHetf~­
~:devices
,
The camcorder is not receiving a GPS
signal (HDR-XR200V).
• Your camcorder may not be able to receive
radio signals from GPS satellites because of
obstructions. Bring your camcorder to an
open area, and set the GPS switch to ON
again.
Images are not dubbed correctly.
• You cannot dub images using the HDMI cable.
• The A/V connecting cable is not connected
properly. Make sure to connect the cable to the
input jack of another device (p. 66).
112