Sony HDR-XR100 Operating Instructions Manual page 162

GENERAL SET
(Other setup items)
The default settings are marked with
~.
When your camcorder is connected to a wall outlet (wall socket), a demonstration movie
appear about 10 minutes after you turn on the
1:1
(Movie) lamp by pressing MODE.
Steps. .
.
.
1t
(HOME)-
ill·
(SETIINGS) .... [GEr-JERAL SETL- [DEMQ MODE] - a desired setting'
.
"r;::;v, . . . '" .
c ..
- LQ!SJ
~
ON The demonstration appears.
OFF
The demonstration does not appear.
<D
Notes
• You can find the demonstration movie on the VISUAL INDEX screen in the default setting. The
demonstration movie will not be restored once it is deleted.
• Meanwhile, a movie you have recorded will be registered as the demonstration movie if the movie
satisfies the following conditions.
- The movie is protected
- The movie is the first one displayed on the VISUAL INDEX screen
- The movie is recorded on the internal hard disk
- The movie is recorded with high definition image quality (HD)
f)Tips
• When you set this item to [aNI and touch
[QRJ,
the demonstration starts playing.
• The demonstration will be suspended:
- When you press START/STOP or PHOTO
- When you touch the screen during the demonstration (The demonstration starts again after about 10
minutes)
- When you turn on the
Q
(Photo) lamp
- When you press
1t
(HOME) or [E (VIEW IMAGES)
You can make the camera recording lamp on the front of your camcorder not to turn on.
Steps
1t
(HOME)--';
ill
(SETIINGS)
-+
[GENERAL SET] - [REC LAMP] - a desired setting
-+
[QRJ-lEJ-OO
~ ON The camera recording lamp lights up.
OFF
The camera recording lamp does not light up.
96