14
Setting up
the DSP8000
loudspeakers
To connect to a Meridian product with BNC Comms
MERIDIAN
SPEAKERLINK
INPUT OUTPUT
If the Meridian source or control unit provides a
Meridian BNC Comms output, you will need to connect
it to the DSP loudspeakers using a Digital/BNC lead.
Connect the DIGITAL OUTPUT and the BNC
•
COMMS socket from the Meridian source or control
unit to the DIGITAL INPUT and COMMS INPUT on
the DSP8000 chosen as the master, using a
Digital/BNC lead.
G Series CD Player or Control Unit
DIGITAL OUTPUT
Front R – Slave
MERIDIAN
DIGITAL
COMMS
INPUT OUTPUT
INPUT OUTPUT
RJ45 lead
BNC COMMS
Digital/BNC lead
Front L – Master
MERIDIAN
MERIDIAN
SPEAKERLINK
COMMS
INPUT OUTPUT
INPUT OUTPUT
•
Connect the MERIDIAN SPEAKERLINK OUTPUT
from the master DSP8000 to the SpeakerLink input
on the other (slave) DSP8000, using a SpeakerLink
lead.
•
Configure the master DSP8000 as M.Coax and the
slave DSP8000 as S.RJ45; see To choose master or
slave and the primary connector , page 4.
DIGITAL
INPUT OUTPUT