Switching The Load To Manual Bypass Condition; Procedure For Switching The Network Power Switch From Manual Bypass Condition To Normal Operation - Emerson 110V User Manual

Network power switch single pole 110v
Table of Contents

Advertisement

Chapter 2 – Operating Instructions

2.4 Switching the Load to Manual Bypass condition

YELLOW LED
(LOAD ON S1)
OUTPUT
(NOT CONNECTED)
YELLOW LED
(LOAD ON S2)
'ON'
1.
By seeing the LED indication check which source is feeding.
2.
Unlock the Bypass switch lock by the using the key provided.
3.
Rotate the Manual Bypass switch in the direction of the source feeding the load as per the warning given on the
mimic.
4.
Relock the Bypass switch, remove the key and keep it in original place.
2.5 Procedure for switching the Network Power Switch from Manual Bypass condition to
Normal Operation
1.
Unlock the Bypass switch using the key provided.
2.
Rotate the bypass switch knob to the Static switch output position, i.e. horizontal position.
3.
Lock the Bypass Switch, remove the key and keep it in original place.
Page 2-2
N
e
t
w
o
r
N
e
t
w
o
r
Fig 2.2 – Switching to Bypass
WARNING
This operation should be performed by Trained personnel only.
SWITCH TO YELLOW LED 'ON' POSITION ONLY.
k
P
o
w
e
r
S
w
i
t
c
h
k
P
o
w
e
r
S
w
i
t
c
h
BYPASS ON S1 SOURCE
BYPASS ON S2 SOURCE
(LOAD CONNECTED TO THIS BYPASS)
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Liebert nps

Table of Contents