Add New Device - LG Chocolate 3 User Manual

3.1 Add New Device

Pairing is the process that allows
the handset to locate, establish,
and register 1-to-1 connection with
the target device.
3.1.1 For pairing with a new
Bluetooth ® device
1. Follow the Bluetooth
instructions to set the device to
pairing mode.
2. With the flip open, press
[MENU].
3. Press Settings & Tools.
4. Press Bluetooth Menu.
5. Press Add New Device.
Set the desired device to pairing.
6. If Bluetooth ® power is set to off,
you will be prompted to turn
power on. Highlight Yes and
press .
7. The device will appear in Add
New Device menu once it has
been located. Highlight the
device and press
® accessory
.
8. The handset will prompt you for
the passcode. Consult the
Bluetooth ® accessory
instructions for the appropriate
passcode (typically "0000" - 4
zeroes). Enter the passcode and
press .
9. When pairing with the Computer,
PC or PDA is successful,
highlight either Always Ask or
Always Connect and press
to connect with the device.
10. Once connected, you will see
the device listed in the
Bluetooth ® Menu and
Bluetooth ® indicator will change
to the (single connected
icon) will show up on your
enunciator when connected to
the Bluetooth ®
also check out the connection
with a blue icon
3.1.2 Icon Reference in Adding
New Device
When the Bluetooth
connection is built and paired
devices are found, the following
icons are displayed.
device. You can
on the list.
wireless
®
79