Transport And Recycle; Technical Data - Kalerm KLM1601 Operation Manual

Transport and recycle

Transport
●
Please save the packaging of the coffee machine for future
transportation.
●
Make sure to empty water inside the machine before transportation,
otherwise, it will damage the machine.
●
After emptying the waterway, please wipe the machine both
inside and outside to dry.
● Once the empty waterway program was executed, the system
will rerun to the program of "first-time use", when the coffee
machine is used again.(
refer to
● While emptying the waterway, there will be a high-temperature
steam sprays from coffee spout. Please pay special attention to
avoid being scalded.
READY
FILL WATER TANK
EMPTY UNIT
Recycle
When recycling the machine, some inner parts can be
recycled to use again. Please pay attention to recycle them
for environmental protection.

Technical Data

Voltage/Frequency
Power
Pump pressure
Capacity of water tank
Capacity of bean container
Capacity of coffee grounds container
Capacity of the brewing unit
Adjusting height of coffee spout
Length of power cord
Net weight
Dimensions (Length×Width×Height)
P6, First-time use)
The machine is on the status of "READY".
Take out the water tank, and the machine
indicates "FILL WATER TANK".
long pressing the cleaning button until
the screen shows "EMPTY UNIT", the
machine begins to clean up the waterway
automatically, and steam will spray from
the coffee spout, please keep distance to
avoid scalding.
After emptying the waterway, the machine
will automatically power off. Take the drip
tray out after the power is switched off, and
clear the water in the drip tray.
220 - 240 V~ 50 Hz /60 Hz
1400 W
19 bar
1.8 L
250 g
15 cakes
7 - 14 g
80 - 140 mm
1.2 m
13 kg
450mm 302mm 370mm
× ×
EMPTY UNIT