Assembly - Pride Celebrity DX Sport Owner's Manual

V I I I . D I S A S S E M B L Y

ASSEMBLY

1. Position the front and rear sections of your scooter as shown in figure 24.
2. Use the frame release lever to lift the front section as you align the frame hooks of the front section with the
lower frame tube of the rear section. See figure 23.
3. Once the frame hooks are over the lower frame tube, lower the front section completely. This will engage the
frame lock. See figure 23.
4. Raise the tiller.
5. Reinstall both batteries and secure with tie-down straps— making sure the strap is positioned over the frame
release lever to ensure proper securement.
6. Connect the front-to-rear harness, rear lighting harness, and both battery harnesses. See figure 22.
7. Reinstall the rear shroud.
8. Reinstall the seat and rotate it securely into place.
9. Unlock the front wheel by turning the tiller lock knob 90° anticlockwise. See figure 21A.
WARNING! After assembly, make absolutely certain the tiller lock knob is in the unlocked
position before riding your scooter.
Celebrity DX Sport
A N D
www.pridemobility.com
A S S E M B L Y
35