Vertex Standard VX-264 Operating Manual page 26

ta ( t ) s
a
alK round can
Press, (or press and hold), the assigned PF key to toggle
the TA Scan feature "On" and "Off".
When operating on a duplex channel system (for example,
a repeater station), TA Scan allows the transceiver to
search both transmit and receive frequencies on your du-
plex system.
When a signal is encountered on the receive frequency,
the transceiver will pause until the signal disappears.
When a signal is encountered on the transmit frequency,
the transceiver will check for activity on the receive fre-
quency every few seconds (interval programmed by your
Vertex Standard dealer).
When the TA Scan feature is activated, the "
blink on the display (See page 11 in this manual).
Note: The TA Scan feature does not activate on a Simplex
Channel.
24
a o
dVanced Peration
t
alK
Press, (or press and hold), the assigned PF key to activate
the Talk Around feature when you are operating on duplex
channel systems (separate receive and transmit frequen-
cies, utilizing a "repeater" station). The Talk Around
feature allows you to bypass the repeater station and talk
directly to a station that is nearby. This feature has no ef-
fect when you are operating on "simplex" channels, where
the receive and transmit frequencies are already the same.
When the Talk Around feature is activated, the "
will be indicated on the display (See page 11 in this man-
ual).
Note that your dealer may have mode provision for "Talk
Around" channels by programming "repeater" and "Talk
" icon will
Around" frequencies on two adjacent channels. If so, the
key may be used for one of the other Pre-Programmed
Functions.
Note: The Talk Around feature does not activate on a Sim-
plex Channel.
reset
Press (or press and hold) the assigned PF key to reset the
RFC (Ready for Communication) condition.
a
round
VX-264 O
" icon
M
perating anual