Table of Contents
Advertisement
F
m
s
olloW
e
can
The Follow Me Scan feature checks a user-assigned pri-
ority channel in addition to the channels previously pre-
programmed into a radio's scan list. For example, if only
Channels 1, 3, and 5 (of the 8 available channels) are
designated for "Scanning", the user may assign Channel 2
as the "user-assigned" priority channel via the Follow Me
Scan.
To activate Follow Me Scan, first select the channel you
want to designate as the "user-assigned priority chan-
nel" by positioning the CH Selector knob on the desired
"priority" channel. Next, press, (or press and hold), the
assigned PF key (the display will indicate "FM. SCAN"
briefly). Finally, rotate the CH Selector knob to the de-
sired "operating channel".
The scanner will search the two channels (user-assigned
priority channel and operating channel) and pause when it
finds a transmission on either channel.
VX-264 O
M
perating
anual
a
o
dVanced
Peration
s
can
Press, (or press and hold), the assigned PF key to add/de-
lete the current channel to/from your scanning list.
To store a particular channel to your scanning list, press, (or
press and hold), the assigned PF key. If you delete a chan-
nel from your scanning list, press, (or press and hold), the
assigned PF key again.
When the scanner is paused, you may remove the channel
from the scan list temporarily by pressing, (or press and
holding), the same key.
Note 1: when store a particular channel to your scanning
list, the display indicates "Scan.Set" briefly and "
will appear on the display.
Note 2: when delete a channel from your scanning list, the
display indicates "Scan. Skip" briefly and the "
will disappear from the display.
Note 3: To reset your scan list to it's original pre-pro-
grammed settings, power the transceiver off, then on us-
ing the VOL/PWR knob.
s
et
" icon
" icon
23
Hide quick links:
Advertisement
Table of Contents
