TP-Link TD-W8961N User Manual page 29

TD-W8961N
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Servicename: Enter a name to mark current connection, or you can leave it blank.

Username: Enter your username for your PPPoA/PPPoE connection.

Password: Enter your password for your PPPoA/PPPoE connection.

Encapsulation: For both PPPoA/PPPoE connection, you need to specify the type of

Multiplexing, either LLC or VC Mux.
Bridge Interface: Activate the option, and the modem router can also work in Bridge mode.

Connection: For PPPoA/PPPoE connection, you can select Always on or Connect

on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there
is no traffic (or Idle) for a pre-specified period of time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically
on.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-9
21