Remote Lock/Unlock Feedback; Headlamp Controls - Chevrolet 2005 TrailBlazer Getting To Know Manual

Getting to Know Your TrailBlazer
6
Select and program functions
(if vehicle is equipped with a Driver
Information Center)
• Press the personalization button
( ) on the Driver Information Center
until AUTOMATIC LOCKING appears
on the display. Press the Select but-
ton ( ) until the desired setting
appears on the display and press
to select it.
Select and program functions if not
equipped with DIC
• With ignition OFF, pull the turn
signal/multifunction stalk toward you
and hold it there while performing the
next step.
• Turn the ignition key to RUN and
LOCK twice, ending in the LOCK
position, and release the turn signal
stalk; the lock switch locks/unlocks,
the horn chirps twice and a 30-sec-
ond timer begins.
• To cycle through the locking/unlock-
ing choices, press the power door
lock switch to the LOCK position to
set locking preference and the
UNLOCK position to set unlocking
preference.
• When the lock switch locks/unlocks
and the horn chirps twice, you have
left programming mode; if more time
is needed, repeat the process above.
• To exit the program mode manually,
turn the ignition key to RUN.
See Section 2 of your Owner Manual.

Remote Lock/Unlock Feedback

(if equipped)
Program Remote Keyless Entry
System lock/unlock feedback (horn,
parking lamps, both or neither)
• Press the Personalization button
( ) on your steering wheel until
REMOTE LOCK FEEDBACK (or
UNLOCK, as desired) appears on the
display.
• Press the Select button (
through the menu of choices. To
program the lock/unlock feedback
feature, press
menu option is displayed.
See Section 3 of your Owner Manual.

Headlamp Controls

The exterior lamps knob is located on
the instrument panel to the left of the
steering wheel.
Activate the automatic headlamp
system that illuminates all exterior
lamps and the instrument panel/radio
lights when needed
• Turn the knob clockwise to the first
position.
) to scroll
when the desired