Using The Keystone Function; Changing Input Device - LG PH300 Owner's Manual

Using the Keystone Function
To prevent the screen image from becoming trapezoidal, Keystone
adjusts the top and bottom width of the image if the projector is not set up
at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality,
use this function only when it is not possible to set up the projector at an
optimal angle.

1
Press the SETTINGS button.
2
Use the ,
OK button.
3
Use the ,
4
Use the ,
5
Keystone can be adjusted from -40 to 40.
6
Press the OK button when finished.
Changing input device
To select an external input
You can select inputs connected to the projector.
• Press the INPUT button on the remote control to display the input
selection screen.
- Connected inputs are displayed first.
• Select an input signal using the remote control's INPUT button to
connect the projector to the desired input.
You can use the
Input List

• Keystone
, , buttons to select OPTION 2 and press the
buttons to select Keystone and press the OK button.
buttons to adjust Keystone.
or button to switch between all the input modes.
USB HDMI
USING THE PROJECTOR
0
◀
L
Close
ꔂ Move
Input Label
▶
R
ꔉ
OK
Exit
29