Table of Contents
Advertisement
7 When the channel scans finish, your Insignia Roku TV shows the number of channels it added.
Scanning for channels can take several minutes.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You'll have to repeat the channel scan if you remove the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels. Your antenna
reception and picture quality depend on the position of your antenna and on your
location relative to the antennas of broadcasters in your area.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press UP or DOWN to change channels.
• Press RIGHT to display the channel list and then use UP or DOWN to select a channel to watch. Or press REWIND or
FAST FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press
to switch to the previously tuned channel.
• Press
to see options for picture and sound settings.
Note
If
or the Jump Back button on a universal remote. For more information, see
devices
Insignia Roku TV remote control
remote control buttons while watching TV.
44
is not available on your remote control, you can use
on page 66.
www.insigniaproducts.com
on page
13
has more information on using the
32"/55" 1080p, 60Hz, LED Insignia Roku TV
on the Roku mobile app
Other
Hide quick links:
Advertisement
Table of Contents
