Capturing A Still Image From A Movie - Sony HDR-SR10 Handycam Operating Manual

Capturing a still
image from a movie
You can save a selected frame from a
recorded movie as a still image.
Select the media which contains movies,
and the media where you want to save still
images before the operation (p. 22).
1
Touch
A
(HOME)-+
~(OTHERS)-+[PHOTO
CAPTURE].
The [PHOTO CAPTURE] screen
appears.
2
Touch the movie to be captured.
The selected movie starts playback.
3
Touch
I~
III
at the point where you
want to capture.
The movie pauses.
To finish capturing
Touch
I
+:J
I -+
[K].
" Notes
• The image size is fixed depending on the image
quality of the movie:
- [r::::l
2.1M] with
HO
(high definition) image
quality
- [r::::l
O.2M] in 16:9 (wide) with SO (standard
definition) image quality
- [VGA (O.3M)] in 4:3 with SO (standard
definition) image quality
• The media where you want to save still images
should have enough free space.
• The recording date and time of captured still
images is the same as the recording date and
time of the movies.
• If the movie you are capturing from has no data
code, the recording date and time of the still
image will be the date and time you captured
from the movie.
-_._--
1\5'1
c.60rnln .....
PHOTO CAPTURE
J>5.1ch
I
""if]
00001
1IlliII.R:
9
0,00,24
999lIQ.g
[ OK,d
h!!lIIiiiJ
0:01:20
50
4
Touch
lOKI.
The captured still image is saved on the
media selected in [PHOTO MEDIA
SET] (p. 23).
When capturing is finished, the screen
returns to pause.
To continue capturing
Touch I~
III ,
then follow the steps
3
to 4.
To capture a still image from another
movie, touch
I
+:J
I
then follow the steps 2 to
4.