Sony HDR-SR10 Handycam Operating Manual page 15

•
A/V Remote
Connector
Open
the
jack
cover.
Handycam Station
Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 8).
Refer also to the instruction manuals
supplied with the device to be connected.
To adjust the sound volume of movies
When playing back a movie, touch
0-
(OPTION)
-+
IE) tab
-+
[VOLUME],
then adjust the volume with c=J/C£] .
.
~.
Tips
• On the VISUAL INDEX screen,
I~I/~
appears
with the image on the tab that was most recently
played back/recorded. When you touch an
image marked with
I~I/~,
you can play it back
from the point it was previously stopped.
" Notes
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV. Some
settings may need to be adjusted on the TV
when playing back. Refer to the instruction
manual of your TV for details.
Operation flow
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.
~
Connect your camcorder and TV
referring to [TV CONNECT Guide].
Touch
A
(HOME)
-+
m
(OTHERS)
-+
[TV CONNECT Guide].
~
Make the required output settings
on your camcorder.
" Notes
• When the
AJV
connecting cable is used to
output images, images are output with SO
(standard definition) image quality.
• Your camcorder and the Handycam Station are
equipped with
AJV
Remote Connector or
AJV
OUT jack (p. 16). Connect the
AJV
connecting
cable or component
AJV
cable either to the
Handycam Station or to your camcorder. If you
connect AJV
connecting cables or component N
V cable to both the Handycam Station and your
camcorder at the same time, image disturbance
may occur.
us
15