Setup Menu; List Of Setup Menu - Panasonic WV-CP500 Installation Manual

Setup menu

Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
Refer to the operating instructions (PDF) for further information.

List of setup menu

Setup item
CAMERA ID
CAMERA
SCENE 1/SCENE 2
ALC/ELC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
BW MODE
i-VMD
SYSTEM
SYNC
ALARM IN/OUT
PRIVACY ZONE
STABILIZER
EL-ZOOM
BACK-FOCUS
22
This item specifies the camera title. The camera title that indicates
the camera location and other information about the camera is cre-
ated with alphanumeric characters and symbol, and displayed on the
screen.
Performs the camera operation settings.
Selects a scene file. It is possible to register and save the settings as a
scene file in case that it is necessary to change the settings such when
shooting at night or on holidays.
Selects the method of controlling the quantity of light in accordance
with the lens to be used.
Specifies the electronic shutter speed.
Specifies gain adjustment.
Specifies electronic sensitivity enhancement.
Specifies white balance adjustment.
Selects the level of the digital noise reduction function.
Performs each setting regarding the black-and-white mode such as
switching between color and black-and-white images.
Performs settings regarding intelligent VMD (Video Motion Detector)
such as motion detection and object abandonment/removal detection.
Performs the settings regarding the camera system such as synchroni-
zation, alarm input/output, and privacy zone.
Specifies the synchronization type.
Performs the settings of the ALARM IN connector and the ALARM
OUT connector.
Hides undesired portions in the camera shooting area.
Decides whether or not to enable the image stabilizer.
Toggles the electronic zoom on and off.
Selects the back focus setting type and performs fine adjustment.
Description