How to Assemble
The Smart Juicer is virtually assembled straight out of the box.
We suggest taking it apart and wash the removable parts in warm
water with a biodegradable, non-abrasive liquid detergent before
the first use. Rinse thoroughly with water and allow to air-dry. This
will eliminate any traces of dust or residue from manufacturing or
shipping. Never submerge the Smart Juicer motor base in water or
any other liquid.
Parts for top assembly:
BOWL
1
1.
Place the bowl on the base so that
its gray arrow lines up with the
black arrow on the base. Make sure
bowl rests flush against the base.
3
3.
Place the auger in the center of the
bowl. Press firmly into place. When
in place, the auger will sit flush with
the top of the strainer.
ROTATING BASKET
STRAINER
2
2.
Assemble the strainer and the
orange rotating basket and place
into the bowl. Make sure the red
dots are aligned.
4
4.
Place the food chute onto the bowl.
Make sure the gray dot on the food
chute and the red dot on the bowl
align.
AUGER
FOOD CHUTE
7